Arduino-Due-Based USB Gateway With Two CAN Bus Ports fro CAN Bus And SAE J1939 Prototyping Or Gateway Design
https://copperhilltech.com/arduino-due-based-dual-can-bus-interface-with-rtc-and-micro-sd/
- Details - Similar
MAX3232 RS232 to TTL Serial Port Converter Module DB9 Connector
https://copperhilltech.com/max3232-rs232-to-ttl-serial-port-converter-module-with-dsub9-connector/
- Details - Similar
SAE J1939 M/F Pass Through Deutsch Connector to DB9 Female Cable
https://copperhilltech.com/sae-j1939-m-f-pass-through-to-db9-female-cable/
- Details - Similar
Embedded Breakout Boards for CAN Bus, RS232, LIN by Copperhill Technologies
https://copperhilltech.com/embedded-breakout-boards/
- Details - Similar
CAN, SAE J1939, NMEA Projects with the Arduino Due
https://copperhilltech.com/can-sae-j1939-nmea-projects-with-the-arduino-due/
- Details - Similar
Copperhill Technologies - CAN Bus SAE J1939 Embedded Controllers
https://copperhilltech.com/embedded-can-interfaces/
- Details - Similar
The espBerry Project - Extending ESP32 Functionality
https://copperhilltech.com/the-espberry-project-extending-esp32-functionality/
- Details - Similar
This is a CAN Bus breakout board for use with the Teensy 3.2 (included in the scope of delivery). It comes with an onboard 5 VDC regulator with reverse voltage protection, a CAN Bus transceiver and a prototyping area.
https://copperhilltech.com/teensy-3-2-can-bus-and-lin-bus-breakout-board/
- Details - Similar
The PiCAN3 board with SMPS (Switch Mode Power Supply) provides CAN-Bus capabilities for the Raspberry Pi 4.
https://copperhilltech.com/pican3-can-bus-board-for-raspberry-pi-4-with-3a-smps-and-rtc/
- Details - Similar
This is an isolated CAN-Bus breakout board using the Texas Instruments chipset ISO1050, together with an isolated DC/DC convertor.
https://copperhilltech.com/isolated-can-bus-breakout-board-5-vdc/
- Details - Similar
|